 |
 |
 |
|
Blocker Control Halters - CLOSEOUT*
The Blocker Control Halters provide a safer, humane alternative to the stud chain. The chain is built in, attached over the top of the noseband and will provide additional pressure when you pull on the halter.
This unique system allows the horse to respond positively and immediately rewards good behavior. The Blocker Control Halter can be used as a training tool* or to help correct bad behavior. It gives you control only when you need it. Do not use as a turnout halter.
"I have a couple of horses that while young would attempt to walk over me during the trailer loading process. Using the Blocker Control Halter enabled me to stop this ill behavior. I highly recommend using the Blocker Control Halter if you are experiencing similar issues during loading." Candy - Medford, Oregon
Ordering Note(s): *Availability subject to stock on hand. All sales are final. This item has been discontinued by the manufacturer. See Sizing Tab for fitting instructions. Black only.
FITTING INSTRUCTIONS: Adjust chain so that it hangs approximately 1" below rubber noseband.
-
If your horse begins to pull or lean, pop the lead rope. The nylon-encased cable crown and rubber nose will immediately apply pressure.
-
When the horse gives to the pressure, the noseband relaxes and the pressure release is immediate.
-
If the horse continues to pull, the rubber noseband will stretch, engaging the chain for increased pressure. When the horse gives to the pressure, the rubber will contract giving the horse instant relief from the chain. Remember it's the release of pressure that teaches why the Blocker Control Halter works so well. He gets instant relief, therefore, learning something from the lesson.
|
|
|
 |
|
 |
|