Description
Trailer Eyes - Accessories - Rechargeable Batteries and Charger options:
| · accessories: Trailer Eyes monitoring system · 2 special purchase offers |
· rechargeable batteries, charger |
Click on "Video tab" for Videos on this product.
| Accessories: RECHARGEABLE BATTERIES, CHARGER: · Trailer Eyes 9V Lithium Battery (9V-LI) |
with Trailer Eyes Lithium Ion battery charger sold separately here or as a
combination.
| · Trailer Eyes 9V Lithium Battery Combo Set (LICOMBO) |
battery and charger combo set. Use this rechargeable battery in your
Trailer Eyes camera instead of repeatedly purchasing new batteries. See below
for combo set + batteries specials.
| · Special: 9V Lithium Battery Combo Set + 1 extra battery. · Special: Trailer Eyes 9V Lithium Battery Combo Set + 2 extra batteries. · Trailer Eyes Battery Charger (only) (CH-9VLI) |
set (see above).
________________________________________________________
Order options:
The Trailer Eyes Monitoring System (kit) is available on this website - click this link.
Other Accessories for Trailer Eyes monitoring system are available on this website from these 2 links:
Trailer Eyes Accessories - Booster Antenna
Trailer Eyes Accessories - Optional Adapters
Choose Trailer Eyes Accessory*:
Rechargeable Batteries, Charger:
· Trailer Eyes 9V Lithium Battery (9V-LI)
· Trailer Eyes 9V Lithium Battery Combo Set (LICOMBO)
· Special: Trailer Eyes 9V Lithium Battery Combo Set + 1 Extra Battery
· Special: Trailer Eyes 9V Lithium Battery Combo Set + 2 Extra Batteries
· Trailer Eyes Batter Charger (only) (CH-9VLI
NOTE*: Price will change according to accessory selected.
NOTICE: Be sure to read and follow instructions for using and driving safety.
Tech Info
Click
on the topic to find out more information, then click on "Return to
Top." (found at the end of each topic) to return to the topic index/list
section here (top).
1. Camera and monitor installation guide:
1a. To set up the camera in your trailer.
1b. To setup the monitor in your pulling vehicles.
2. Best results tips.
3. Visual help: Lining up trailer ball and hitch.
4. Visual guide: Kit contents.
___________________________________________________
1. Camera and monitor installation guide:
Return to Top.
1a. To set up the camera in your trailer--
1. Use the clamping
base to mount the camera. The clamping base can be
clamped on any pole or board which is less than 2 ¼”
in diameter or thick. Choose the mounting spot and tighten the
clip bolt on the clamping base.
2. Loosen the tilt
lock knob, adjust the camera ,point it in the direction
where you wish to monitor, and tighten the tilt lock knob.
3. Insert a 9V
battery. Turn the On/Off switch to the ON setting.
The camera is set!
Return to Top.
1b. To setup the monitor in your pulling vehicles--
1. Mount the goose-neck suction mount to the windshield, dashboard, or
window.
2. Attach the monitor to the goose-neck suction mount.
3. Attach the antenna connector to the monitor.
4. Open the car door and mount the booster antenna (magnet base) on the
side of your vehicle. Run the wire between the antenna and the monitor
through the car door and the car frame, not through the car window and
doorframe.
5. Plug the power jack into the monitor, and then plug the 12V
car lighter adapter into the lighter jack.
6. Turn the monitor on.
7. Adjust
the position of the monitor, the antenna wire, and the power wire to avoid
interference with the driver.
Return to Top.
2. Best
Result tips
For best performance, please consider these few guidelines:
• The distance between the monitor and camera
-- Straight line, clear view, no obstacles in between, up to 300 feet.
-- When the camera is in the trailer, and the signal needs to go through
layers of metal and is not in direct line with the monitor’s antenna, up to 60
feet.
• A fresh, strong 9V battery to
provide adequate power to transmit the signal.
A single alkaline 9V battery can operate the camera up to 5 hours during the
day or 3 hours in night vision mode.
• The
booster antenna is very important. It is the most common cause of a lack
of image or a distorted image. The best place to mount the
antenna depends on the type of vehicle:
SUV:
Please mount it on the strip of metal that makes up the window frame on the
driver or passenger side (on the same side the camera is mounted). Put it
on the second row passenger side, or possibly further back.
If this is not available, please mount the antenna on the outside
of the car above the door handle on the same side the camera is
mounted. Mount the booster antenna on the same side of the
vehicle where the camera is mounted.
Pickup Truck: Please mount it on the outside of the cargo bed, near the back, on
the same side the camera is mounted.
DO NOT MOUNT THE ANTENNA ON THE ROOF. If the antenna is mounted on the
roof, it will pick up and boost extraneous signals causing severe
interference.
• Camera should be mounted between 8 to 15 feet above the monitored
objects.
• Turn off the camera while it is
not in use.
• When not in use for long periods
of time, please store the unit in a cool, dry place.
3. Visual help: Lining up trailer ball and hitch.
4. Visual guide: Kit contents.
Wireless color camera with night vision
- 3.5" color screen monitor
- Booster antenna with magnet base
- Standard antenna
- 12V car lighter power adapter
- Goose-neck windshield suction mounting base for the monitor
- 360 degree Clamp mounting base for the camera. 9v battery compartment attached (Battery not included)
- Permanent mounting bracket for camera
Reviews
Video
Video showing monitoring in process - Trailer Eyes:Trailer Eyes - installing and using in trailer: animated gif:
